Lamp #35 - Shoji Tall 200 mm

A taller Japanese Shoji style lamp.

Shade measures 200 mm height x 108 Width

Lamp with walls, base and top:

250 mm height by 150 mm width

Print 4 of the walls and 1 of each of the base pieces and the shade.

Melt 4 x M3 Inserts into the base to attach the base cover with 4 M3 x 8mm screws

No supports required.

The fassung-lamp socket ( e14-28 mm):
     https://www.amazon.de/dp/B097K4YNL9

The electrical cable and switch:
     https://www.amazon.de/dp/B002DAOX58

The E14 Bulb used here:

      https://www.ikea.com/de/de/p/solhetta-led-leuchtmittel-e14-250-lm-kerzenfoermig-opalweiss-30498748/

4 x M3 by 8 Screws

    https://de.aliexpress.com/item/32443118299.html?

4 x M3 Inserts

    https://www.amazon.de/dp/B08BCRZZS3?

6 x M12 Mutter (Nut for weighting)

    https://www.amazon.de/dp/B01M30BU88?

The slicer settings for the base and e14 short neck:

.20 mm Standard

(All standard settings and speeds, Aligned seam settings)

Filament:  Eryone Matte PLA+ Black

The slicer settings for the 4 walls and top pieces

.20 mm Standard

(All standard settings and speeds, Aligned seam settings)

Filament:   Eryone Matte PLA+ Black

The slicer settings for The Shade:

Filament:   eSun PLA+ Beige

.16 mm High Quality and Generic PLA
Infill %  - 30 , Gyroid
Wall Loops - 8
Top Shell - 8
Bottom Shell - 6
Outer Wall Speed - 60 mm/s
Inner Wall - 150 mm/s

Seam Position- Aligned