Alchemist raised rail remix

Download and use one of Chane's modified shrouds from the linear rail remix. If using a linear rail (reccomended) then also grab the Chance priming block for the rail you are using. If not, then use the stock priming block. Even if you are not using the linear rail, you still need one of the linear rail remix shrouds, or the ZAXMOD skeleton shroud, listed separately. You then need to choose either all the SMOOTH or ANGLED files, depending on the look you want, combined with the rest of the supplied files to drop into the alchemist build. Note that you need to replace the stock detent block with the one provided to act as an anchor for the rail hardware.

See the attached photos for file options reference and additional hardware needed.

Please note. I have NOT tested the ElevatedPicRailA+B_PRINTEDOPTION file. I highly recommend that you purchase one of the following 10 inch machined aluminum rails to use instead. If you choose to use the printed options, please use the most hardy, robust, stronkest CF, PA, ETC filament you have for maximum rigidity. 

https://www.amazon.com/gp/product/B09X2Z7KQK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

OR

https://www.amazon.com/Long-Picatinny-Weaver-Mount-Slots/dp/B01EP5FKBY?ref_=ast_sto_dp

Any 10.1 inch or 257mm pic rail section could theoretically work, though your screw holes may be in different places. A STEP file for the middle rail section is included should you be inclined to modify the screw positions.

Chance modifies the shroud as part of the linear rail remix. This mod is dependent on that modified shroud. You can still use this mod even if you are NOT planning to use a linear rail. Still download and use just the shroud files from chance's linear rail remix, but use the original pump. Conversely, this is fully compatible, and was designed, to work in conjunction with chance's linear rail mod.