Flying Key Holder - Harry Potter

Had already printed the keys made by @dmorgan1 but was unsure how to show them off. Not enough room to have them hanging and wanted them on my HP shelf. Had a play in Tinkercad and came up with this.

• Brand Kiwifil
• Type PLA+
• Colour Transparent
• Print Temp 203.5
• Plate Temp 55.0 °C
• Speed 150 mm/s
• Retraction Distance 5.5
• Retraction Speed 50mm/s
• Layer Height 0.15mm
• Line Width 0.4mm
• Walls Thickness 1.2mm
• Infill Density 15%
• Supports Yes