Plantarium (Flexible plant lighting system)

Summary 

Plantarium is designed for lighting the hydroponic planters below.

• S
• M
• L
• XL

It is fitted with one or two 30-cm LED aquarium lights (standard size) and the height of the LEDs can be adjusted as the plant grows.

It can also be combined with the IoT kit below to store measured data such as CO2 levels, images, temperature, humidity, light intensity and water depth on the cloud and send summaries and alerts via email.

• Frames for Raspberry Pi / DIY-based IoT kits

You can learn how to use it in detail in the Udemy course below:

• Hands-on course on Raspberry Pi / DIY-based IoT kits

How to use

Assembly

• Have a look at the assembly video below. You don't need any screws, nuts, or glue.

Adjusting the height of the LEDs

• Use the supports (long and short). The supports (long) are 5cm long and the supports (short) are 2.5 cm long. You can combine them as you like.

Setting up 1 or 2 LEDs

• Use the LED bars (long and short): the LED bars (long) are for 2 LEDs and the LED bars (short) are for 1 LED.

Print settings

• Infill: 100% infill is recommended for bolts to prevent breakage
• Adhesion assistants: brim or raft for "LED_bar_long" and “supports_long”
• Filament material: PLA (Clearances are adjusted for PLA.)

About us

My name is Kensuke and I live in Tokyo. I like designing, gardening, spearfishing, and cooking. I am happy if you print my design.

• X
• Instagram
• Youtube
• Homepage
• My Products