Handle for Cardboard Box - Parametric

Handle for Cardboard Box - Parametric, NO SUPPORTS, EASY ASSEMBLY
15
55
0
212
updated May 10, 2024

Description

PDF

Handle for Cardboard Box - Parametric

NO SUPPORTS! EASY ASSEMBLY

 

There is a standard model but if you want some specific size, you can use the parametric model for Fusion360.

 

  1. Choose the model: print the STL or make your own size with the parametric model.
     
  2. Print the model: I did it in PLA. 
     
  3. Gather the materials: you will need the box you want to handle, the 3D printed handle and stopper, a pencil and a cutter



     
  4. Draw the holes: draw the holes on the cardbox using the stopper piece as a template.



     
  5. Cut the holes: carefully, cut the holes with the cutter.



     
  6. Place the stopper: place the 3D printed stopper in the inner part of the box and insert the 3D handle through the holes on the outer side of the box.



     
  7. USE IT!


     

 

Tags



Model origin

The author marked this model as their own original creation.

License