The author remixed this model.
Excellent original model, the only change I made was to make the nut plates larger and the hole bigger to allow for heated inserts.
I wanted a way to secure the door easily so designed a multi part magnetic door latch. The handle is replaced with a two part setup with a 12x3mm magnet hidden inside it. The two door handle parts are glued together. 3mm brass inserts go into the handle.
The striker has a 12x3mm magnet as well, ensure you get the correct polarity. No glue should be needed to fit the magnets as they are a tight fit. An M3 8mm bolt secures the striker to the printer frame in an existing hole.
This was designed for the K1 Max, unsure if it will fit any other models.