My interpretation of a well know silencer (MANTA)
21
134
0
1303
updated May 10, 2024

Description

PDF

FAKE AIRSOFT REPLICA!!!

I designed my interpretation of a wel known silencer, but smaller.

PLEASE LET ME KNOW IF THE PRINT WORKS FINE FOR YOU, let me know if you have questions or need support

-1 2 cm long (4.7 inch), 4.5 cm diameter (1.75 inch)

STL files
-consists of a main body and top cover
-a Acetech BRIGHTER C TRACER UNIT (57 cm long, 29 cm diameter)fits precisely in it. There is a seperate stl with the tracer insert unit

-to make the trace fit perfectly, just screw/unscrew it a bit on the tracer insert until it fits 100%
-14 mm CCW thread for standard airsoft outer barrel
-you can fill it yourself with foam to make it silent.
because of model shape, some sanding afterwards of the outer side is necessary. I you want, you can spray paint over it with matt black camo paint of matt black primer, both work great!

 

3D PRINTING SETTINGS

I printed it on my creality ender 3 KE

0.4 mm nozzle, 0.1 lines, 125 speed, 250 nozzle, 70 hotbed
Printed in PETG
I use 3 to 5 walls for stiffnes and 50% infill
Use good support structure! The new creality slicer 5.0 and the Cura slicer both work good. Old version 4 creality slicer does NOT work

Because alignment is crucial, tolerances are tight. You may need to do a little sanding when using the tracer insert

Tags



Model origin

The author marked this model as their own original creation.

License