Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x112.48mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA Basico Control3D Black Transmission Distance: 1.6
PLA Sunlu Meta Grey Transmission Distance: 3.5
PLA ESUN PLA+ Beige Transmission Distance: 4
PLA Prusament Vanilla White Transmission Distance: 1.2
PLA Basico Control3D White Transmission Distance: 1.2
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Grey
At layer #12 (1.04mm) swap to Beige
At layer #16 (1.36mm) swap to Vanilla White
At layer #22 (1.84mm) swap to White for the rest.
The author marked this model as their own original creation.