"Z-Bottom" Debris/Dust Plug

A simple, two-part plug to prevent bits of filament, screws, etc. from falling into the Z-bottom, lead screw hole.
13m
1× print file
0.20 mm
0.40 mm
2.00 g
0
9
0
43
updated May 10, 2024

Description

PDF
  1. Print four of the parts (half-plugs.)
  2. Place two half-plugs opposite each other on a lead screw.
  3. Press the half plugs into the hole on the "Z-Bottom."
  4. Voila! 

Model origin

The author marked this model as their own original creation.

License