Kinetic Box with bottom

Kinetic Box like the other, but this time there's bottom inside.

the box is 50/50/50mm with 4mm “bottom” height

Print in 0.2 Layers, no support needed

Print 3x Slide_1

Print 3x Slide_2

Print 1x Bottom

You will need 

6 M2x10 (for the Slide Assembly)

3 M2x8 (you can cut 2mm from the M2x10…) (for the bottom)

6 Magnet 4mm diameter 1.5mm height

Drill the 2mm hole support

Please don't tighten the 3 screws for the “bottom”, the “bottom” need to be free!)

https://www.amazon.fr/dp/B00O9Y3ATG?psc=1&ref=ppx_yo2ov_dt_b_product_details

https://fr.aliexpress.com/item/32996717283.html?spm=a2g0o.order_list.order_list_main.69.21ef5e5b8Lyfk0&gatewayAdapt=glo2fra

Full Rebuild of the box, for bottom integration