Skydio 2 Beacon GoPro mount

Remixed v3bahumut's Skydio 2 Beacon mount to hold the beacon in the case more securely, also reinforced the mount point to provide more support for lateral movement.

Notes:

Print is designed to flex a bit to insert/remove the beacon, so you'll want something that won't fatigue and form stress cracks. PLA+ is a good cheap option if you don't want to mess with PETG or TPU, but Armadillo TPU is ideal for this case. You'll want a good part cooler to prevent overhang issues.

I use a .5 nozzle, but .4 will work fine. For print settings I use: .2 layer height, 5-6 wall/perimeters, 3-4 top/bottom.

• Beefed up GoPro Mount
• Added tabs to better secure in mount
• Removed material near flex points for better motion
• Made vertical orientation