Haruhi Suzumiya Danchou Desk Pyramid
Description
PDFThis is a model of the "Danchou" (Leader) pyramid on Haruhi Suzumiya's desk.
Made it for a friend who had requested it. When I did my initial search for Haruhi Suzumiya related 3D models I noticed a severe lack thereof, so here is my contribution for any interested parties.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
0.15 - 0.3
Infill:
10% / 2.5%
Filament:
SUNLU PETG Black
Notes:
The resolution is up to you, I went with 0.15mm because I was not planning on doing any post processing other than painting the words white. You can go with a larger resolution to save time, although I would recommend sanding and painting the print it if you do that.
I used 10% infill for the first 5mm of the base and added some BB's into the squares to weigh the print down. Then did a couple layers of solid infill to trap them in. The rest of the print I used 2.5% infill to help with any support, although it isn't really needed.Lastly, I used PETG because I made the first couple layers with TPU to give the pyramid a softer bottom layer, so as to not scratch any finished wood.
𝗜 𝗿𝗲𝗰𝗼𝗺𝗺𝗲𝗻𝗱 𝗣𝗟𝗔 𝗳𝗼𝗿 𝗮 𝗱𝗲𝗰𝗼𝗿𝗮𝘁𝗶𝘃𝗲 𝗽𝗿𝗶𝗻𝘁 𝘀𝘂𝗰𝗵 𝗮𝘀 𝘁𝗵𝗶𝘀, 𝘂𝗻𝗹𝗲𝘀𝘀, 𝗹𝗶𝗸𝗲 𝗺𝘆𝘀𝗲𝗹𝗳, 𝘆𝗼𝘂 𝗵𝗮𝘃𝗲 𝗮 𝘀𝗽𝗲𝗰𝗶𝗳𝗶𝗰 𝗽𝗹𝗮𝗻 𝗳𝗼𝗿 𝗻𝗼𝘁 𝘂𝘀𝗶𝗻𝗴 𝗶𝘁.
Category: DecorTags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.
