Zebra hueforge

Hueforged Zebra

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Orange Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Beige
At layer #10 (0.88mm) swap to Jade White
At layer #16 (1.36mm) swap to Orange for the rest.