Moving latches for drawers (no assembly requirements) lock system

Amazing simple and minimalist latches for your drawers. 

Are special to keep pets, children or thieves away!!!

Everytime when i leave of my room and i leave door open my dog enter and open my drawers and she thief my papers xD!!!! so i decided to design a minimalist and simple strong lock system with a moving part in only 1 print without assembly or supports requirements.

only needs a little piece of double sided tape to attach at side of your drawers and enjoy!

I loved the results so i decided to share with all you (check the videos)!!

-Please check the side where you going to set the latch, i upload a left and right design.

-Works in drawers with 15 to 25mm of side distance. (all mines are of 15mm)

Settings:

• 0.2mm layer height and 20% of infill is ok (37 minutes) but you can do a speeder print with bigger layers (21 minutes in 0.3mm)
• print with NO SUPPORTS! (if you activate the supports the pivot dont will work).

note:

•  The A is for my twitch channel @Astroworks_cl please follow me! 

TEST OF DRAWER WITHOUT LATCHES

 DRAWER WITH LATCHES