Lamp #29 - Ribbed Marble

A ribbed style lamp shade that can uses Lamp Base#4, a 30 mm hole and Marble filament

https://www.printables.com/model/858997-lamp-base-4

The shade is 160 mm height x 150 Width. 

With the base, the lamp is 270 mm height and 150 mm wide.
 

No supports required.

The fassung-lamp socket ( e14-28 mm):
     https://www.amazon.de/dp/B097K4YNL9

The electrical cable and switch:
     https://www.amazon.de/dp/B002DAOX58

The E14 Bulb used here:

   https://www.ikea.com/de/de/p/solhetta-led-leuchtmittel-e14-470-lm-rund-opalweiss-90498707/

The slicer settings for the base and the tall neck:

.20 mm Standard and 

(All standard settings and speeds, Random seam settings

Filament:  Eryone PLA+ Matte Black

The shade itself was printed using a marble PLA.. 

     Sunlu PLA+ Marble

The slicer settings:

.20 mm Standard  and Bambu PLA Marble Flow Rate Calibrated PLA
Infill %  - 15 , Grid
Wall Loops - 5
 

Seam Position- Aligned