Wine Bag Decapper

I've always struggled with getting the caps off the large bulk-bags of wine.

I've seen commercial units but they look too big/clumsy and I don't have a local supplier.

This is designed to pop the caps off easily and prints quickly.

There are may styles of bags/caps - this one is designed for caps approximately 40mm wide. It's a snug fit so the plastic hook part can be as strong as possible.

Printed flat it needs no supports and it seems to be strong-enough with a 40% infil. You might be able to get away with less - but it's a really quick print.

Scale the z-axis (if you're printing flat) to get a wider / narrower pry-tool.

I've included G-Code for .2 and .3 layer heights for PETG and .2 for PLA.

All print in under an hour.