"Delfts Blue" Darth Vader filament painting

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 100x100.44mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.5mm

Filaments Used:
PLA+ GST3D BLACK Transmission Distance: 0.7
PLA+ GST3D BLUE Transmission Distance: 4
PLA+ GST3D Ice Blue Transmission Distance: 34
PLA+ GST3D WHITE Transmission Distance: 10
This print uses 4 unique filaments

Swap Instructions:
Start with BLACK
At layer #3 (0.32mm) swap to BLUE
At layer #7 (0.64mm) swap to Ice Blue
At layer #9 (0.8mm) swap to WHITE for the rest.
 

If you like this model you might also like the other models i have created in the same style. 

R2D2 https://www.printables.com/model/869685-r2d2-delfts-blue-hueforge

Blue Stormpoopers https://www.printables.com/model/870416-delfts-blue-stormpoopers-filament-painting