Non-Contact Tool for Keychain

A simple keychain tool for opening doors or grabbing objects. Print in any material with a high bending modulus and bending strength. PLA/PLA+ or PETG are both good choices, but more so the former. I tested this print using some PLA+ with several large refrigerators with no issues in opening the doors.

Print time is less than 30 min!

Printing Info:

1. Perimeters ≥ 4 (the higher the better)
2. Infill = None required (more perimeters are preferred)
3. Layer height = 0.2mm
4. Temperature = As high as your material allows

Please, consider buying me a drink if you got some use out of this print.