New XL_Eggs dispenser stackable (different models)

Horizontal stackable egg dispenser

**Added new model Extraramp with more inclination, more ramp, but same height,  it is necessary to remove an area of the model once printed so that the eggs can pass through the floor below.

Practical dispenser, model for 12/13 uds. Stackable lower part, infinite floors x 12, model .without supports
Always have fresh eggs, thanks to this dispenser, fill the dispenser with 12 L size eggs, 

Bottom model, you can make as many tiers as you need, depending on the height of your fridge drawer.  

The inclination of the model, makes that the eggs do not pick up speed, and do not suffer blows, it may be necessary to push them minimally if they cross.  
 **Add new model with more inclination only 12 mm more height   (name with high version.

Add model split for little bed.

Configuration recommended:   3 top layer, 3 bottom layer, 2 perimeter ,  line width  0,4, infill 10%,   ~ 275 grs  bottom,   ~ 225 grs top. 

June2024_ Added anti-fall part preferable tpu or petg. 

September 2024  add models  XL version  

modified models with longer and wider egg passage and improved functionality, without increasing the height.

botton model and top model (also split model for small beds). 

other models. Egg   

https://www.printables.com/es/model/250788-eggs-rotary-dispenser-slow-down

https://www.printables.com/es/model/250789-helical-and-rotary-eggs-dispenser