Microscope RMS DIN dust caps
Here the dust caps for microscope objective and nosepiece. They have RMS /DIN thread, 0,800 Inch 36 tpi. The fit is…
7
59
2
264
updated
November 15, 2021
Description
PDFHere the dust caps for microscope objective and nosepiece.
They have RMS /DIN thread, 0,800 Inch 36 tpi.
The fit is very loose, to allow low-quality prints to work.
Yes yes I'm studying OpenSCAD... but for now, .stl only
Print Settings
Rafts:
No
Supports:
No
0,1-0,2
Filament: Ultimaker Whatever Burgundy
Notes:
If positioned with the flat face down, they will not need rafts or supports.
Use high resolution to get a decent thread. They should work with any plastics, I used PLA.
If they come out too loose or too tight, you may scale the whole solid by plus or minus 0,5%
Tags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.
