Mario Kart Live Tires

Two different sets of tires for Mario Kart Live. One set was created to increase the ride height so the karts can clear area rugs and transitions better. The other set has a flat cross section to increase the contact patch and traction. Tire clearance is tight but no rubbing was noticed during use. When printing, the tires should be on their side with supports only on the beads. The sidewalls and tread pattern do not need supports.

Tires were printed with 95A TPU with 0.2mm layer height and 100% infill.

Please feel free to reach out if you have any issues with the model.