M20 support for 16mm grow tent poles

Supports 20mm Installation PVC Tubes on a common 16.1mm growtent pole.

Made this to stop my tent from getting sucked together by exhaust fan pressure

Printed with

•  0.4 Nozzle
• 0,2 Layerheight
• Polymaker ASA
• No Support
• 100% Infill

Please be aware that printer settings vary extremely so print this with a known profile and slice accordingly. 

If you can achieve it, ive put ziptie slots on the underside but you gotta have some solution to print it like raising the print on the bed.

Poles snap right on, very satisfied.

Feel free to leave a make, short picture upload, done. Thank you very much