D&D Dice Tower/Storage

Printed: 0.2mm layer height

Cura estimates (I've printed several variations of each part and have lost track of actual times and filament use)

Total print time: 1 day, 10 hrs, 20 mins

Filament used: 243g

Dragon-Dice-Tower_Dice-Tray - 43 mins - 6g

Print this one first. This variation had the wall thickness doubled since I eventually broke the tab off while picking it up. That is why it's not painted.

Dragon-Dice-Tower_Top_Small - 40 mins - 6g

Print this one second. I'm not happy with the "rocking" that this part has on the two pegs and will hopefully get revised.

Dragon-Dice-Tower_Top-Large - 7 hrs - 58g

Print this one third. This part is large and flat, beware of lifting without good bed adhesion. I used old paint on this part and the top-small which caused the part to warp. I "tried" to flatten it back out.

Dragon-Dice-Tower_Bottom -  1 day 2 hrs - 173g

Print this one last. Has spots for dice-tray part, top-small part and dice. I had been keeping some printed miniatures in there as well, but they got pretty beat up.