Ikea SKORVA midbeam cable holder for campervan

I made some cable organisers for SKORVA midbeam, i used those beams for my campervan's bed and had problems how to mount the cables in the beam.

It is very easy to install, it cliks into the beam and hold the cables or you can also use as a blanket ( there are two versions avaiable too).

There are two sections of the SKORVA, if you extend it you have to use the small and the big section models too.

I made them with 10mm hight but you can easily modify it in the slicer just use the scale command. i used 20mm sections but it is on you how big you need.

Every beam is different so maybe there are some little tolerance issues so you can modify the model in any software that can use STEP format.

Printed from PLA because of its flexibility but i don't recommend PETG if you want it to be more heat resistant please use ABS or ASA.

Printed at 240 degrees and 4 walls 3 top and bottom.