Ender 5 (pro) electronics enclosure relocator

This bracket is used to relocate stock electronics enclosure to the back of the printer. This is useful for doing any modifications to the Z-axis. You need to print at least 4 of these to mount the box securely. 

You will need 8 M5x8 bolts and M5 T-nuts to mount these. Roll-in T-nuts are better because they always mount securely and you can use them without removing the extrusion.

PLA is not recommended because it is very brittle, use ABS if possible, if not PETG will be fine.

Do not rotate the brackets in the slicer, it has features to compensate for ABS shrinking and first layer squishing.

You can print with any layer height but first layer needs to be 0.25mm. Make at least 4 walls and 40% infill. 

My electronics enclosure was kind of bent out of shape so I had to enlarge the holes to compensate for that.

I recommend installing these 2 corner braces to keep the rigidity. Electronics enclosure was a structural component on Ender 5.

https://www.thingiverse.com/thing:2917551