DJI Spark parabolic shape range booster
A simple parabolic shape range extender for DJI Spark The focal point of each parabol is equal to 2cm and should be…
11
45
0
396
updated
November 14, 2021
Description
PDFA simple parabolic shape range extender for DJI Spark
The focal point of each parabol is equal to 2cm and should be located on the flat side of the antenna.
So the device is not symetrical, as the antennae are not either.
Simply slide it on the antenna, big holes on the bottom side.
Print it without support
glue aluminium foil
then epoxy glue the bottom side
That's it
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
No
Supports:
No
0.2
Infill:
20%
Filament:
Prusament PC Grey
Notes:
Any material does the trick.
Tags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.
