Snow wolf

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #13 (1.12mm) swap to Marine Blue
At layer #18 (1.52mm) swap to White for the rest.