Green Eyes
Hueforge art with 4 colours. On bambu with ams is easiest but can be done on any printer
11
44
2
420
updated May 3, 2024
Description
PDFPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue Gray
At layer #12 (1.04mm) swap to BambuLab Green
At layer #15 (1.28mm) swap to White for the rest.
Tags
Model origin
The author marked this model as their own original creation.
