Tabletop terrain set with modular trees, stone walls, and (ice) Crystals for 28mm TTRPG

This is a great flexible set to start off, or expand you tabletop terrain collection. The set consists of two different modular trees (two trunks and two tops), five different crystals, and seven different stone walls. All modelled are sized for 28mm tabletop games like Dungeons&Dragons.

The trees are modular as the tops can also be used as bushes and the topless trees as dead trees. I personally print them with a layer hight of 0.16mm, but you can go as detailed as you want. I would advise a minimum infill of 15% to ensure the sturdiness. No support are required. Because the trunks and tops are separate, you can use green and brown filament to save you some painting. I personally use Polymaker Polyterra earth brown and Army dark green, but any green and brown filament will work.

The crystals can be printed with a transparent filament on 0% infill with a 0.12mm layer hight so create the best crystal like effect. I personally use Filamentum Crystal clear filament.

The stone walls I personally print with a 10% infill at a layer hight of 0.2mm with Esun PLA +, but any grey filament should work.

If you're looking for some cool resin printed tabletop minis, check out my website (EU) www.dungeonhero.nl , or Etsy shop (non-EU) https://www.etsy.com/shop/DungeonHero .

If you have any questions, feel free to shoot me a message. Have fun printing!