The base has two holes that allow it to be attached to a worktop. I attached them to a small leftover piece of wood panel.
The holes in the base mounting brackets are intended for 5mm melting nuts. As screws I used existing screws from a mounting kit for an action cam. But the STL files also include print templates for hand screws for inserting M5x40 threaded screws with 8mm hexagons.
Printed with PLA, but most materials are suitable.
The base must be rotated onto the base plate in the slicer and can be printed without support.
The two swivel brackets require support.
The hinge pins are broken off the carrier plate after printing.
Edit June 13 2024:
Today I printed the screw housing myself for the first time and made two small changes:
I added a layer at the beginning of the hole for the screw thread so that it can be printed with the thick part of the housing facing downwards without support. This layer then has to be drilled/punched through before inserting the screw.
I also changed the screw cap so that it fits a little tighter in the screw housing. I recommend applying glue to the upper part of the thread before inserting the screw, and also a drop of glue between the screw and the cap.
Edit Sep. 15 2024:
Added step-files.
-------------------------------
Die Basis hat zwei Bohrungen, mit der sie auf einer Arbeitsplatte befestigt werden kann. Ich habe sie auf einem kleinen Reststück einer Holzplatte befestigt.
Die Bohrungen in den Aufnahmebügeln der Basis sind für 5mm Einschmelzmuttern vorgesehen. Als Schrauben habe ich vorhandene Schrauben aus einem Befestigungs-Kit für eine Action Cam verwendet. Aber die STL Dateien beinhalten auch Druckvorlagen für Handschrauben zum Einsetzen von M5x40 Gewindeschrauben mit 8mm Sechskant enthalten.
Gedruckt mit PLA, aber auch andere Materialien können verwendet werden.
Die Basis muss im Slicer auf die Grundplatte gedreht werden und kann ohne Support gedruckt werden.
Die zwei Schwenkbügel benötigen Support.
Die Scharnierstifte werden nach dem Druck von der Trägerplatte abgebrochen.
Edit 13. Juni 2024:
Ich habe heute das Schraubengehäuse zum ersten Mal selber gedruckt und zwei kleine Änderungen vorgenommen:
Ich habe am Anfang der Bohrung für das Schraubengewindes einen Layer eingefügt, damit es ohne Support mit dem dicken Teil des Gehäuses nach unten gedruckt werden kann. Dieser Layer muss dann vor dem Einsetzen der Schraube durchbohrt/durchstoßen werden.
Außerdem habe ich die Schraubenkappe geändert damit sie etwas strammer im Schraubengehäuse sitzt.
Ich empfehle, vor dem Einsetzen der Schraube den oberen Teil des Gewindes mit Klebstoff zu versehen, und auch zwischen Schraube und Kappe einen Tropfen Klebstoff aufzubringen.
Edit 15. Sep. 2024:
Step-Dateien hinzugefügt
The author marked this model as their own original creation.