A Knight's Dice Tower!

The Knight's Dice Tower! 165mm high and ready to have your dice tumble down it with a capture point at the bottom, to display the result. 0.4 nozzles and below are good for the detail but it will print at 0.6, you just lose detail and the small bars on the window and gate will suffer.

PATREON & PATREON SHOP.
patreon.com/3DFreeman

You could join up for a month and download the STL files for all my designs or you can now buy bundles from my Patreon shop for $3

Good luck and thanks for the support.

---

Regarding the Dice Tower competition: 

Ok, I admit I had a advertisement of this model on Printables prior to 16th April but didn't actually have the model available here directly for free, it was only available through my Patreon or on the Printables store.
I totally understand if you want to disqualify this model, I just wanted to bring attention to the fact that it is now free and through this statement show that I am being open about my intentions.

Good luck to all the entrants!