Hueforge Vintage BMW

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA HueForge Dark Gray 1.3 Transmission Distance: 8
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Dark Gray 1.3
At layer #12 (1.04mm) swap to Gray
At layer #18 (1.52mm) swap to Jade White for the rest.