I needed a simple to use and inexpensive handheld wire straightener for the small diameter wire I frequently use. Designed for M22759/32 “tefzel” wire in gauges 22-18 or any other stranded wire with a diameter less than 0.060"
Prints easy with a 0.4 nozzle and 0.2 layer height set to 2 perimeters and 4 top/bottom layers. Recommend applying a modifier to the bearing pegs on the base for extra perimeters will help with strength.
Additional hardware required:
4x M3x10 Screws
4x M3 Nuts
5x MR115-2RS 5x11x4mm Bearings
The author marked this model as their own original creation.