Walkie Talkie cradle/base

I got my son a pair of walkie talkies last week. He wanted a cradle so they don't wander everywhere.
We sat down and browsed for inspiration. He found nothing that met his taste.

He was clear the devices should be enclosed to a certain height and I've measured them so the slot they slide into is a perfect match. Also the spacing between the 2 devices had to be exactly as commanded.

Lastly, he didn't want them standing up straight, but they must have a 30 degree angle. So I modelled a triangle shape and a support to prevent it from falling over.

Total time modelling: 30 minutes!

Prints as one piece without supports.

The Walkie Talkies are the cheap ones from a Dutch discounter.