Lamp #17

A shorter octagon lamp shade that can uses Lamp Base#4 and a holder plate specifically made for this shape shade.

https://www.printables.com/model/858997-lamp-base-4

Lamp Base #4 allows the usage of closed top shade that sits in a tight holder plate with a 30mm opening to attach the plate to the base.

The shade is 110 mm height x 85 Width. 

With the base, the lamp is 140  mm height with a 120 mm wide base.
 

No supports required.

The fassung-lamp socket ( e14-28 mm):
     https://www.amazon.de/dp/B097K4YNL9

The electrical cable and switch:
     https://www.amazon.de/dp/B002DAOX58

The E14 Bulb used here:
           https://www.ikea.com/de/de/p/solhetta-led-leuchtmittel-e14-250-lm-kerzenfoermig-opalweiss-30498748/

The slicer settings for the base and the octagon plate:

.20 mm Standard and 

(All standard settings and speeds, Random seam settings

Filament:  eSun PLA+ Black

The shade itself was printed using a white PLA.. 

     Prusa PLA Yellow

The slicer settings:

.16 mm High Quality and Generic PLA
Infill %  - 30 , Gyroid
Wall Loops - 8
Top Shell - 8
Bottom Shell - 6
Outer Wall Speed - 60 mm/s
Inner Wall - 150 mm/s

Seam Position- Aligned