Longboard Trucks - (PolyDryer Promo Video)

Printed in PolyMide™ PA612-CF with 10 perimeters and 45% infill. 

Grommets Printed in PolyFlex™ TPU90 - printed solid with perimeters. This made the board handle well at slow speeds, for a stiffer ride try PolyFlex™ TPU95-HF.

Print 4 x Wheel Spacer.stl - offset the wheel from the T-Bar.stl

List of non-printed parts (part list below will make 2 sets of trucks):

2 x M8 threaded rod cut to 200mm length

4 x M8 Nyloc nuts for securing wheels - washer optional

2 x (10mm x 60mm half threaded bold) M8 thread - See reference pic

4 x M10 washers to secure 3D printed grommets

2 x M8 Nyloc Nuts to fix trucks together

8 x M4 bolts and corresponding nuts for attaching trucks to board - Nyloc recommended. 

*These trucks were designed specifically for the PolyDryer™ promo video and are not intended for heavy use - ride with care.