Cat on the Moon

Printed at 15% infill with a layer height of 0.12mm with a base layer of 0.2mm

Filaments Used:
    PLA 3DJacob Black Transmission Distance: 0.3
   PLA 3DJacob Metalic blue Transmission Distance: 2.5
    PLA 3DPower Grey Transmission Distance: 3
    PLA 3DJacob White Transmission Distance: 6

Swap Instructions:
    Start with Black
    At layer #6 (0.8mm) swap to Blue
    At layer #10 (1.28mm) swap to Gray
    At layer #12 (1.52mm) swap to White for the rest.