Monoprice Mini Delta Build Plate Holder for Honeycomb Storage Wall

I have a bunch of Wham Bam magnetic build plates for my Monoprice Mini Delta (MPDM). The plates are about 115mm. It will hold up to 6 plates. I tried to keep the honeycomb aesthetic, so there is a little bit more material than is absolutely necessary.

I printed mine in Polymaker white ASA wth a 0.4mm nozzle on a CR-10v2. No support, 20% infill. I used the “insert-with-M3.stl” and “sd-card-holder-cover.stl" from the original Honeycomb Storage Wall project.

Designed in OnShape, original project is here:

https://cad.onshape.com/documents/5d29dbe53bccc657e9669b68/w/7c59fd665702cc8399846fea/e/9a53e429bc7f1aa41677f5e4?renderMode=0&uiState=663316fef0e036346f4d45b2

Added a build plate holder suitable for round build plates sized around 115mm.