Forklift truck modifications and additions

I redesign for example the blower but I kept the original vertical duct and the air filter. The original blower did not have a shell all around. The top was not strong enough to support the vertical duct. This is why I redesigned a new blower. I had several logo signs. The rear lights were redesigned. The attachment for the hydraulic cylinders and the steering were redesigned too. The air filter attachment bracket and several black panels were added. The bracket for the orange front lights was added too. If you need some guidance or additional information let me know.  For the body, I removed the front axle, the exhaust and its pipe, the roof from the main body itself.

The same model appears on Cults 3d at https://cults3d.com/en/3d-model/game/forklift-truck-3d-model-print-plastic-diy-3d-print-cargo-forklift-3d-model. There are some split but not enough to respect all colours and to have all printable parts. I got some challenge during printing. There are some parts that are too thin to be printed or not strong enough. I had to redesign some of those. I also cut some parts to be able to respect the different colours with a single extruder.