Hand Crank for the Pastamatic

Hand Crank for the Pastamatic 
Manual crank  for the Pastamatic Filament Spool Winder 
Pastamatic - Filament Spool Winder Bambu Lab X1C/P1P AMS
link: https://www.printables.com/model/466883-pastamatic-filament-spool-winder-for-bambu-lab-x1c

Three versions of base:
HPaC-01V1-base-simple -simple with a protection ring -could be used in another similar project 
with the label "Past@matiC" (HPaC-01V2-base) and without (HPaC-01V3-base-without-label)

Printing:
I used PLA for rings, and other components were printed using PETG.
However, I recommend PETG only for the axle and axis components, others could be prepared using PLA. 
 

I separated the handle's axle from the crank and added one axis of freedom and the possibility of replacing this element. Also, I want to have texture on the handle surface.

Protection rings could be blocked by 1.75 mm filament pieces.