Under Desk Drawers Brackets - Slotted with 6 mm Offset

This remix of the Under Desk Drawers brackets by Godard Scientific, allowed me to mount an additional reasonable-sized drawer unit on the left and right edges of a TekDesk standing desk. The width on the outside of the desk's mounting T-frame on the left and right sides is a mere 140mm and adding a left and right mounting bracket will leave very little space for a drawer unit. 

The remixed middle bracket fits over the desk's T-frame mounting bar and forms a continuous mount with the next drawer unit. This adds some valuable drawer width for the edge drawers. 

Print Instructions

• You can print the brackets standing up-right (tall) on the flat end without supports needed. 
• Add a brim or mouse ears for stability.

I modified the brackets to be compatible with a TekDesk standing desk and its mounting T-frame that will allow an additional drawer unit to be mounted on the left and right edges of the desk.

• The middle bracket is slotted with a cutaway to fit over the T-frame's 90° angled mounting bar. There are 2 versions for the left and right sides of the desk with the cutaway in the correct position.
• Moved the middle bracket screw holes to clear the mounting bar.
• To allow the brackets to fit flush with the desk's underside, I added a 6mm offset to the left, right and middle brackets to have clearance for the 5 mm thick T-frame and mounting bushes that the middle bracket fits over.