Voron 2.4 Z Chain Transpose 10x15 version

Edited the base mount so it goes on top of the cable hole instead of it going further to the right which uses more cable lenght.

Also note that I removed 7 segments from the original lenght of the cablechain (Formbot kit) as it otherwise rubed and was propped forward from the A/B drive stepper mount.

Might want to flip the base mount upside down to avoid supports.

BOM:

• X/Y Voron cable chains (from the Formbot kit)
• 6x M3x5x4 (Voron standard) heat set inserts
• 6x M3x6 flat head screws
• 2x M5x10 button head screws
• 2x M5 roll-in T nuts
• 2x zip ties (optional)

Uses less chain segments and shorter cable path as it sits right on top of the cable hole.