Enclosure Top Plug Edge passtrough 4x

You can use this to install 4 Festo plugs on both sides with M5 Inserts. You don't have to put the hoses through the lid.

Parts needed:

• 1x Enclosure Top Plug Edge for Festo + Inserts
• 8x Festo QSM-M5-4
• 8x Ruthex Insert M5x9,5
• 4x PTFE Tube Ø4x13
• 1x Screw M3x6
• 1x Hexagon Nut M3

In the g-code i have paused the print. Here you can put some tape on the support. So later it would be easy to remove the support and the surface of the plug would be much more better. I normaly use the “3M Pro 2090 tape”.