BigTreeTech Pi 1.2 dovetail to Din Rail

Created to mount this BTT Pi 1.2 case to Din Rail:

BigTreeTech BTT Pi 1.2 Case for Wall Mount or 2040 (dovetail style) by ProwlerON | Download free STL model | Printables.com

https://www.printables.com/model/863832-bigtreetech-btt-pi-12-case-for-wall-mount-or-2040

Uses 3mmx8mm tapered head screws to mount from the bottom case to this Din Rail mount.

This model was designed to allow full access to the case screws located on the bottom.

Printed in PLA for all testing. I will probably do ABS if more heat resistance is required.

This model was made possible by the work from CrazyIvan359(@CrazyIvan359_329483) and their work on this model:

https://www.printables.com/model/254550-lrs-35-din-mount

Head there and check their work out.

Created Din Rail mount instead of dovetail mount.