GoPro 44mm Tripod Quick Attach Mount

I have a large amount of GoPro buckle style mounts and a tripod that can use 44mm plates for quick attachment but no way to combine the two. So, I modeled a two-part, glue together solution!

Hardware Required:

Glue

Print BOM:

1 x 44mm Tripod Mounting Plate Bottom

1 x 44mm Tripod Mounting Plate Top

Print Parameters:

Material: PLA, PETG, ABS, etc.

Recommended Settings: 

0.4 mm Nozzle, 0.2 mm Slice Height, 5 Bottom, Top and External Perimeters, 30% or greater infill.

Secondary Settings:

0.6 mm Nozzle, 0.3 mm Slice Height, 5 Bottom, Top, and External Perimeters, 30% or greater infill.

I have successfully printed these files using both settings.

Supports: Everywhere