Siehe hier K1c Upgrade Exhaust Radial-Fan + HEPA Filter von Marcy93 | Kostenloses STL-Modell herunterladen | Printables.com ]
Adapter um den hinteren Lüfter im K1c oder K1 durch einen 92mm Lüfter zu ersetzen.
Ziel War es Leiser und gleichzeitig Effektiver zu werden.
Ein Lüfter 92 x 15mm Lüfter wird benötigt
Ich habe hierzu zusätzlich einen Spannungswandler verbaut um normale 12v PC Lüfter einsetzen zu können.
zur Befestigung habe ich selbst schneidende Geräteschrauben verwendet.
Durchmesser 2,5 - 3mm möglich
[ Gerne bei Fragen, Interesse oder kleinen Änderungswünschen kontaktieren ebenfalls wenn ihr mich Unterstützen wollt :D https://www.paypal.com/paypalme/clwmarcy ]
See here https://www.printables.com/model/1067815-k1c-upgrade-exhaust-radial-fan-hepa-filter ]
Adapter to replace the rear fan in the K1c or K1 with a 92mm fan.
The goal was to become quieter and more effective at the same time.
A 92 x 15mm fan is required
I also installed a voltage converter so that I could use normal 12v PC fans.
I used self-cutting device screws to attach it.
Diameter 2.5 - 3mm possible
[ Please feel free to contact me if you have any questions, interest or small change requests, also if you want to support me :D https://www.paypal.com/paypalme/clwmarcy ]
I want to thank HENLOR Henlor | Printables.com , his K1 CAD files are very handy when it comes to modeling. it saves up a lot of messuring time.
Check out his other stuff
The author marked this model as their own original creation.