Pioreactor 20ml v1.1 printable parts

Print your own Pioreactor 20ml v1.1! 

The Pioreactor is a simple 20ml bioreactor built on a Raspberry Pi. 

What's a bioreactor? It's an optimized “home” for microbes, like yeast, bacteria, and algae. Bioreactors come in many different sizes and designs, and are used in industry and research.

Along with some necessary hardware, you can build your own Pioreactor with the printed parts here. Learn more about it at pioreactor.com.

Recommended print instructions:

• Print settings: 0.15mm QUALITY
• 0.4mm nozzle
• Filament: matte black PLA, 
  • bottom.3mf should be PC, PC-CF, or ASA
• 10% Grid infill

Other required pieces:

• 4x M3 1.8 mm hex nuts 
• 4x M3 30mm countersunk screws
• 4x M2.5 4mm screws
• 4x M2.5 10mm screws
• 4x M2.5 6mm screws
• 2x M2.5 6mm countersunk screws
• 4x M2.5 12mm standoffs
• 4x M2.5 12mm+6mm standoffs
• 4x M2.5 hex nuts
• 4x M2.5 heat-set inserts
• 1x #024 o-ring, lubricated (x-ring is preferred)
• 1x #121 o-ring, lubricated
• 1x Raspberry Pi (with headers), SD card, and PSU.
• 1x Pioreactor HAT 
• 1x Pioreactor heating PCB
• 1x 24-400 20ml vial
• 1x Pioreactor vial cap
• 1x 10mm to 15mm stirbar

Assembly instructions are available here.

The vial cap is a different design, and available here.