HEPA and activated carbon filter for 3d printers

Warning: check that there are no collisions with the printer after installation

General Information

This Model was inspired by BentoBox v2.0 Carbon filter for Bambu Lab X1C, enclosed P1P & Voron Trident & others?

I printed out the BentoBox, but I wanted to use the Carbon Air Filter from Bambu Lab. I also wanted to reduce the amount of parts needed for the assembly.

The printed parts should be printed in temperature-resistant materials (e.g.: PETG, ABS, ASA ....)

Material list

• PSU
• Female DC plug 5,5mm * 2,1mm 
• 8x M3 thread inserts
• 8x M3x 35 bolts
• 2x 4020 DC 24V Fan 
• HEPA Filter 81,5 x 41,5 x 14,0
• Bambu Activated Carbon Air Filter

Print Settings

Infill: 15%

Wall loops: 3

Support: Yes