Large/Gallon Ziplock Bag Storage/Dispenser Box

I made these boxes to hold various size ziplocks in our bag, foil and wrap drawer. The cardboard boxes created a chaos. 

Because the drawer is fairly deep I also attached a platform under these boxes to lift them up to a comfortable height so that nothing could be left on top of them when you close the drawer. The platform has some “secret” compartments under the boxes for unusual and seldom used items.

I've included the Fusion 360 CAD files, they are fairly well parameterized so you should be able to make different size boxes. For shorter boxes that fit on the build surface you should use my other model shown below.

Prints without support in two pieces that I used epoxy to glue together. Because this box is so long, the split is across the middle so it can fit on a normal bed slinger like the MK3/MK4. This Large size is great for gallon ziplock bags. Smaller bags can use my other modes:

https://www.printables.com/model/862507-ziplock-bag-storagedispenser-box

Show how these boxes are split:

I used PLA, any rigid material should work. Concentric bottom fill pattern would probably look great. Of course, print on the closed ends with the split edge up.