Laptop/tablet holder for Ikea Skadis board

A simple Laptop/tablet holder for Ikeas Skadis board. The 2 available parts are mirrored and printed flat as shown:

The gap without tension is 10 mm and it should be able to flex to about 13-14mm. Test to make sure it does not snap. Recommend material such as PETG which is more capable of flexing without snapping rather then PLA (which can work, just be careful)

So typically tablets with covers, Microsoft surface laptops and thin laptops should fit but check your dimensions.

If demand for other dimensions is available I will create different ones.

Enjoy!